The Drawing

Top View

Side View

Front View

Progress Chart

STEP	W1	W2	W3	W4	W5	W6	W7
Interview
Planning
Cutting/Smoothening The wood
Artifact Production
Final Touches

12/7/15

Procedure: Final Designing

Cogitation: Sometimes your final output may judge the presentation you made no matter how finished it is. So do not cram.

11/16/15

Procedure:  Making the artifact (base)

Cogitation:  Always start w/ the most important part of the artifact you are making.

Production

A.  CUTTING LIST:

Part	No.	Material	Length	Width	Thickness
Base	4	Wood	16 inches	2 inches	¼ inches
Front Width	1	Wood	16 inches	1/3 inches	¼ inches
Back Width	2	Wood	16 inches	2 inches	¼ inches
Walls	12	Wood	16/3 inches	2 inches	¼ inches
Upper Base	4	Wood	16 inches	1/3 inches	¼ inches
Fastener	44	Nails

B. TOOLS AND EQUIPMENT:

Make a list of the tools and equipment you intend to use.

• Jigsaw
• Coping saw
• Hammer
• Drill
• Sandpaper
• Wood Glue
• Filler

 

C. PRODUCTION PLAN:

Step	Procedure/Materials	Tools/Equipment	Risk	Time
1	Cutting each piece of wood into 16 x 2 x ¼ inches	Coping saw, Ruler, Jigsaw	Loss of body parts, Uneven measurements	2 Days
2	Connecting pieces of wood	Hammer, Nails	Puncturing of body parts, cracking of wood	2 days
3	Finishing touches	Filler, Hammer, Spray Paint, Sandpaper		1 day

11/13/15

Procedure: Cutting and Smoothening the wood. Also making holes to then.

Cogitation: Always be precautious. You don’t know what will happen next.

11/11/15

Procedure: Smoothening the wood.

Cogitation: We learned that we need to cut again some woods for some parts of the artifact.

11/9/15

Procedure: Cutting the wood.

Cogitation: We learned that if cut some woods, it may become rough.

10/23/15

Procedure: Revising the Plan

Cogitation: We learned that we need to adapt to the requirements of the project by cutting the wood in half. 

   

10/14/15

Procedure: Making the plan

Cogitation: Make sure that you have a plan to work on.

The Interview Part 1

Before we could make our artifact, the first thing that we did was to interview our client, Mr. Victor Hugo Algabre. Eventually we found out what his needs were.

Other Requirements

Design Requirement:

1.      Must be made given only the requirements of 6 pieces of 

   16 x 2 x ½ inches of wood

2.     Must satisfy the client’s need.

CONSTRAINTS AND CONSIDERATIONS:

Constraints	Grade	Considerations	Grade
6 pieces of 16 x 2 x ½ wood		Wood Glue
		Nails
		Sandpaper
		Height
		Color used

TOP FIVE PRIORITIES:

List your top five most important constraints and considerations.

CONSTRAINTS:

1. 6 pieces of 12 x 2 x 1/2

CONSIDERATIONS:

1.    Height

2.    Artifact

3.    Color

4.   Number of materials to be used in making the    artifact.

5.   Workers